The latest news from Chem Resist Fluid Transfer
This is the latest news section of the website where we will keep you updated with Chem Resist Fluid Transfer news and projects.
Luke Booth (pictured on the right of the picture) – a member of Chem Resist Fluid Transfer sales team was part of the Great Britain Australian Rules Football team recently crowned European Champions.
Plastomatic Electrically Actuated Ball Valves supplied to a major food manufacturer
To support a new CIP system at a major food manufacturer Chem Resist Fluid Transfer have supplied 8 electrically actuated 2” ball valves as part of the upgrade.
Chemiguard Pressurised Tanker Offload Cabinets
Chem Resist Fluid Transfer has recently supplied a 3 Chemiguard pressurised tanker offload cabinets to support the expansion of lithographic printing plate manufacturer.
Almatec conductive PTFE pumps
Due to increased production Chem Resist Fluid Transfer has recently supplied 4 Almatec E15UTT conductive air operated double diaphragm pumps to an established research facility based in the UK.
Pan World Magnetic Drive Pumps
Chem Resist Fluid Transfer has recently supplied a further 6 Pan World magnetic drive pumps to a chemical manufacturer based in eastern UK.
Initially a pump was supplied on a trial to run alongside a competitors’ unit to evaluate performance, reliability and total cost and after extensive trials the decision was made to replace all of the competitors’ pumps with Pan World PW-C units.
The PW-C pumps incorporate an E-CTFE lining inside a robust cast iron outer casing. All pumps were specified with E-CTFE / ceramic / Viton wetted parts; various material options are available upon request.
The pumps are installed on various applications throughout the plant including bulk transfer and tanker loading.
Established UK agents
Being the main UK agent of Pan World pumps for over 15 years Chem Resist Fluid Transfer has extensive stocks of pumps and spares for all of the Pan World range. With flow rates up to 90m3/hr and a wide range of material options the Pan World range are an excellent choice for all your corrosive and aggressive pumping requirements.
Dosing Systems supplied into Waste Recycling Plant
Chem Resist Fluid Transfer has recently supplied 3 complete dosing systems to a waste recycling plant based in the South of England.
The chemicals were Sulphuric Acid, Hydrochloric Acid and Sodium Hydroxide and our knowledge of chemicals and thermoplastics was a key element to Chem Resist Fluid transfer being chosen to handle this project.
We designed and manufactured 3 separate systems each with different materials of construction to ensure excellent chemical compatibility to allow the plant to safely dose from their bulk storage into existing process pipework.
All 3 systems were completely assembled and tested prior to delivery to enable the customer to simply connect up and begin dosing as required.
Our ChemiGuard enclosures are an excellent solution for this type of application and offer a range of features that can significantly increase safety when handling these types of aggressive and corrosive chemicals.
News Archive: 2015
ChemiGuard increases site safety at UK cheese factory
To supply a safe and secure tanker offloading system that produces a flowrate of 20m3/hr
The client required a system to offload 36% hydrochloric acid from a road tanker into their bulk storage tanks whilst maintaining a high level of health and safety.
Our ChemiGuard range offered an ideal solution to this by providing a fully enclosed system complete with a magnetic drive self-priming pump (this pump will not air-lock which can be a problem on tanker offload applications). The Chemiguard unit has integrated PPE storage, 200 litre bund, fully lockable doors and is manufactured from UV stable material.
We specified a World Chemical YD505GV-AD5-G magnetic drive self-priming centrifugal pump to reach the desired flow rate whilst using polypropylene pipework to combat the corrosive characteristics of the hydrochloric acid.
Acid Transfer Pumps
Chem Resist Fluid Transfer has recently supplied an acid transfer pump to a major cheese manufacturer based in the south west of England.
One of the main challenges was that the customer was considering various pipe runs through the plant at design stage and wanted to understand the commercial impact on all options prior to installation.
To overcome this we utilised our Hydroflow software which allows for the detailed modelling of a proposed systems’ operation, therefore all options can be analysed so a final decision can be made.
A design duty of 12.2m3/hr @ 55 metres head was finally agreed resulting in a 2” pump complete with 11kW motor, baseplate, coupling & guard; motors were to be suitable for variable speed drive to allow fine tuning of the operating point.
Chem Resist Fluid Transfer supplies Hygienic Pump Trolley for Pharmaceutical Application
The passivated and electro-polished pump trolley consists of 2 Almatec E15ETZ-F4-XO1 air operated double diaphragm pumps complete with ET15EFT-F pulsation dampers, independent air filter / regulators and tri-clamp connections.
The station is to be used to transfer products within the pharmaceutical industry so the pumps and dampers were manufactured without threads on the liquid connections to reduce the possibility of bacteria forming.
Mobile Pumping Station
Chem Resist Fluid Transfer has recently designed, manufactured and supplied a mobile pump station to a chemical manufacturer in Scotland.
The pump station incorporates a self-priming magnetic drive pump, integral bund, control panel (with low load monitor for dry run protection) and all pipe-work & valves etc. The pump will be used throughout the site for transferring various chemicals from bunds, day tanks and also tanker offload.
Pump Centre Exhibition
Chem Resist has just returned from exhibiting at the Pump Centre exhibition in Telford.
This is the fourth time Chem Resist has exhibited and also the first opportunity to showcase the new range of ChemiGuard® products – tanker offload and dosing systems.
All ChemiGuard® cabinets are lockable, manufactured from moulded UV stable plastics and can be customised to suit individual customer requirements.